English
Create striking, high-impact turning projects with these stabilized spalted maple pen blanks, proudly made in Canada. The fine dark lines and contrasting zones characteristic of spalted maple give each blank a unique, highly sought-after look for pens with strong visual impact.
What size are the blanks?
Each blank measures a minimum of 3/4" × 3/4" × 5", ideal for most pen kits and many project kits. This size provides ample material for drilling, turning, and trimming. The blanks shown in the photo have been sanded to highlight the figure and are representative only. Your blanks will be selected at random and may vary in colour, figure, and pattern.
What does “stabilized” mean?
Stabilized refers to wood that has been impregnated with resin under pressure, reinforcing softer or highly figured areas and eliminating weak spots. This creates a blank that drills cleanly, turns smoothly, and resists tear-out or blowouts. Each blank is unique and will be selected at random. Some colour variability is normal due to differences in wood density and how the resin is absorbed. We do not offer refunds for colour variation or minor internal imperfections, which are inherent to burl wood.
What does “spalted” mean?
Spalted describes natural markings created when fungi begin to break down wood fibres. In maple burl, this process forms dark lines and zones that trace through the grain. Spalting is purely visual in these blanks, adding contrast and artistic detail without affecting their suitability for turning. No two blanks will ever look the same.
How should I finish these blanks?
These blanks are easy to drill and turn. For best results, sand progressively using Abranet or sanding mesh, followed by Micro Mesh. Use a cyanoacrylate glue finish followed by a plastic polish. Friction polishes like Doctor's Wood Shop, Mylands, Aussie Oil or Shellawax products will also give you a durable, high gloss finish.
Price is per blank in Canadian dollars.
Français
