English
Restore sharp, efficient cutting performance to your carbide rougher with this 10.5 mm square Nanograin carbide cutter KD 0. Designed for dependable stock removal and clean shaping, this cutter is ideal for bringing square blanks to round, forming tenons, and establishing straight, crisp lines on spindle and small bowl projects.
Built for durability and consistent edge life, the KD 0 square profile delivers stable, predictable cuts — making it an excellent primary roughing cutter before switching to round or detail tools.
What is included?
What tools will this cutter fit?
This 10.5 mm square carbide cutter is compatible with:
This cutter will NOT fit the original Pen Master carbide tools with the aluminum handle.
How can I sharpen this cutter?
Nanograin carbide cutters are designed to be rotated to a fresh edge when one side becomes dull. Loosen the screw, rotate the cutter to a new cutting edge, and retighten securely. If all edges have been used, light sharpening can be done carefully with a fine diamond sharpening card or diamond stone and lapping fluid. Maintain the factory bevel angle and apply light pressure. Avoid overheating the cutter.
Always ensure the cutter is seated flat and tightened securely before returning the tool to service.
Safe use of carbide cutters
Avoid sharp impacts, as carbide inserts can fracture if struck. Always cut at or slightly above centre to maintain control and reduce aggressive cutting action. Wear a dust mask, safety glasses, and a face shield when turning, and keep loose clothing, hair, and gloves well clear of the work area.
Price is per cutter, in Canadian dollars.
Français
