Heirloom pepper grinder mechanism - antique copper

Heirloom style pepper grinder mechanism. To make this kit, you will need 1" Forstner bit, 1-3/4" Forstner bit, 5/16 drill bit, 1" jam chuck, 60 degree live centre and a three jaw drill chuck or collet (not included). 

Kit requires a hole about 1" diameter to pass the pepper. Cast metal working parts. Housing is 2" dia x 4 1/2" high. Recommended blank size 2-1/2 to 3" square by 4" long. Shown here in Ambrosia Maple. 

This is a woodworking turning project that requires turning, finishing and assembly with woodworking equipment. You will not receive a finished grinder.

Assembly instructions

Price per kit in in Canadian dollars.